Powder Metallurgy ASP2052 Grade Round Bars Supplier, Stockist in Mumbai, India
About Powder Metallurgy ASP2052 Grade Round Bars
IMI Alloys India LLP is the best manufacturer of the ASP2052 Grade Round. We use raw material which is good quality. In our company, we use tested raw materials for the production of this product. Our company products have high demand in the market, not national but also international too. We provide these rounds in different diameters as per requirements. ASP2052 shows properties like fabricability and formability. Their tensile strength is approximately 650 mpa to 880 mpa. They possess excellent fatigue-fighting strength. The various products of this grade are ASP2050 grade round bar, ASP 2050 grade forgings, ASP2050 grade steel coil and strips, ASP2050 grade flat bar and square bar, etc. The treatment they undergo after manufacturing quenching, annealing, tempering, normalizing, etc. They can be welded using resistance methods and fusion methods too. The standards that are followed are AISI and DNS. They are equivalent to high-grade alloys.
ASP2052 Grade Round has a chemical composition, including cobalt, vanadium, tungsten, chromium, and molybdenum.
Table of Content
- What is Powder Metallurgy ASP2052 Grade Round Bars
- Standard Specification For Powder Metallurgy ASP2052 Grade Round Bars
- Powder Metallurgy ASP2052 Grade Round Bars Equivalent Grades
- Chemical Composition of Powder Metallurgy ASP2052 Grade Round Bar
- Heat treatment Hardening of Powder Metallurgy ASP2052 Grade Round Bars
- Searches Related to Powder Metallurgy ASP2052 Grade Round Bars
- Powder Metallurgy ASP2052 Grade Round Bars Applications
- Export Destinations for Powder Metallurgy ASP2052 Grade Round Bars
ASP2052 HSS Powder Metallurgy Round Bar, HS 10-2-5-8 Powder Metallurgy Round Bars, High Speed Steel 1.3253 Powder Metallurgy Round Bars Exporter, Powder Metallurgy ASP 2052 Steel Round Bar, Powmex Powder Metallurgy Grade ASP2052 Round Bars, CPM REX76 Powder Metallurgy Round Bar, Powder Metallurgy ASP2052 Grade Round Bars Manufacturers, Powder Metallurgy ASP2052 Grade Round Bars Suppliers, ASP®2052 Powder Metallurgy Round Bars, HSS S390 Powder Metallurgy Round Bars Stockholder, TSP52 Powder Metallurgy Round Bars, High Speed Steel ASP2052 Hardened & Tempered Powder Metallurgy Round Bar Supplier in Mumbai, India.
Our company provides ASP2052 Grade Round with good characteristics like machinability, wear resistance, toughness, hot hardness, and grind-ability. Our ASP2052 Grade Round has good physical properties and mechanical properties such as modulus of elasticity, mean coefficient of thermal expansion, thermal conductivity, specific thermal capacity and specific electrical resistivity.
Powder Metallurgy S 790 High Speed Steel Hot Rolled Round Bars, Powder Metallurgy ASP2052 Cold Drawn Round Bars, Buy Comprehensive Variety of HSS Powder Metallurgy ASP2052 Quenched & Tempered Round Bars, Powder Metallurgy Grade ASP2052 Industrial Round Bars, Powder Metallurgy ASP2052 Grade Round Bars Exporters, Powder Metallurgy ASP2052 Grade Round Bars Stockist, FAX40 Powder Metallurgy ASP2052 Forged Round Bar, Powder Metallurgy Grade ASP2052 Round Bars Dealer, ASP2052 Powder Metallurgy Round Bars Stockist in India
There are many processes to produce these rounds in our company, such as machining, polishing, hot forming, electrical discharge machining, and welding. Our rounds are used in various applications such as end mills, shaper cutters, hobs, fine blanking. Our ASP2052 Grade Round shows mechanical properties like yield strength, tensile strength and elongation. This grade of alloy is a high-performance grade with improved machinability. This round contains carbon, vanadium and cobalt, which provide abrasion resistance and red hardness. This alloy is used in special-purpose cutting tools where high hardness, abrasion resistance and toughness are required. ASP2052 Grade is also perfect for machining nickel-base and titanium alloys for heavy cutting, such as gear milling cutters, profiling machines, milling cutters, twist drills, taps and broaching tools. IMI Alloys India LLP manufacture products with great properties and characteristic’s such as flawless finishing, perfect thicknesses, and correct dimensions.
Specifications of Powder Metallurgy ASP2052 Grade Round Bars
- Material : HSS
- Form : Round
- Diameter : 12 to 380 mm
- Length : 3 to 6 m
- High Cobalt : 8%
- High Tungsten : 10%
- Heat Treatable : HRC 67-69
- Processing : machining (grinding, turning, milling), polishing, hot forming, electrical discharge machining, welding (special procedure including preheating and filler materials of base material composition).
- Application : End mills, Taps, Hobs, Drills, Shaper cutters, Cold work tools, Broaches, Fine blanking, Bi-metal saws, Dies etc.
Equivalent Grades of Powder Metallurgy ASP2052 Grade Round Bars
| ERASTEEL | Work No | Bohler | Thyssenkrupp | NACHI | CRUCIBLE | DIN | Aisi |
| ASP 2052 | 1.3253 | S 790 | TSP52 | FAX40 | CPM REX76 | HS 10-5-3-9 (1.3253) | S390 |
Chemical Composition of Powder Metallurgy ASP2052 Grade Round Bar
| C. | Cr. | Mo. | V. | W. | Co. | Oths. |
| 1.6 | 4.8 | 2.0 | 5.0 | 10.5 | 8.0 | – |
Heat treatment Hardening of Powder Metallurgy ASP2052 Round Bars
| 1st preheating | up to approximately 490°C in air convection furnaces |
| 2nd and 3rd preheating | 850 °C 850 and 1050 °C |
| Austenitising temperature(1) | 1050-1200 °C |
| Hardening medium | hot bath 550°C/air oil air or gas at high pressure |
| Tempering | not less than 3 times one hour at 540 – 570°C |
| Hardness | 64-67 HRC |
| Soft annealing | 870-900 °C |
| Stress-relieve annealing | 600-650 °C |
| Cooling in furnace | 10°C/h down to 540°C |
| Annealed hardness | < 300 HB |
Searches Related to Powder Metallurgy ASP2052 Grade Round Bars
high speed steel din 1.3294 round rod, high quality asp2052 powder metallurgy cold work hss round bar, cold work asp2052 powder metallurgy round rod suppliers in mumbai, hss asp2052 powder metallurgy round bars and rods, high speed steel asp2052 grade powder metallurgy round bars, asp2052 powder metallurgy round rod stockist in mumbai, asp2052 powder metallurgy hss round rod dealers, alloy high speed steel asp2052 powder metallurgy round rod manufacturers in delhi, powmex asp2052 powder metallurgy round bar supplier, asp2052 powder metallurgy hss round rod manufacturers in india, asp2052 powder metallurgy round bar distributors, high speed steel asp2052 powder metallurgy round rods, alloy high speed steel asp2052 powder metallurgy round bar, asp2052 powder metallurgy round rod price india, asp2052 powder metallurgy round bars / rods price list, asp2052 powder metallurgy round rod price per meter, molybdenum high speed steel asp2052 powder metallurgy round rod rate suppliers, a wide range of the best quality asp2052 powder metallurgy round bars stockist in india, high speed steel asp2052 powder metallurgy round bars, asp2052 powder metallurgy molybdenum high speed steel round rod price, hss asp2052 powder metallurgy round rods price per kg in india, molybdenum high speed steel asp®2052 round bar, high speed steel asp2052 powder metallurgy round rod, asp2052 powder metallurgy round rod price per kg, grade asp2052 powder metallurgy round bars, hss asp2052 powder metallurgy round rods, alloy high speed steel asp2052 powder metallurgy round rod manufacturers in mumbai.
Applications For Powder Metallurgy ASP2052 Grade Round Bars
Generally, Powder Metallurgy bars are used for machining at high speeds. Powder Metallurgy Products are widely used for:
- Blanking
- Broaches
- Cold Work
- Cutting Tools
- Drills
- Fine Blanking
- Milling Cutters
- Saws
- Taps and Dies
- Shaper Cutters
- Hobs
- End Mills
Export Destinations for Powder Metallurgy ASP®2052 Round Bars
Countries
Thailand, Croatia, Nepal, Libya, Ecuador, New Zealand, Hungary, Mongolia, Norway, Ukraine, Slovakia, Russia, Israel, Sweden, Chile, Kenya, Kazakhstan, Italy, France, Trinidad & Tobago, Czech Republic, Azerbaijan, Qatar, Singapore, Tunisia, Venezuela, Pakistan, Saudi Arabia, Serbia, Lithuania, Jordan, Iran, Yemen, Estonia, Sri Lanka, Australia, Malaysia, Egypt, Greece, Gambia, Poland, Finland, Ireland, Hong Kong, Chile, United States, Ghana, Bulgaria, Brazil, Macau, Morocco, Belarus, China, Namibia, Colombia, Bahrain, Mexico, South Africa, Argentina, Switzerland, Spain, Peru, Belgium, Poland, Angola, Germany, Afghanistan, Puerto Rico, Netherlands, Turkey, Bolivia, Oman, Kuwait, Tibet, Zimbabwe, United Kingdom, Vietnam, Costa Rica, Mexico, South Korea, India, Lebanon, Iran, Japan, Philippines, Indonesia, Denmark, Bangladesh, Nigeria, Taiwan, Nigeria, Iraq, United Arab Emirates, Gabon, Algeria, Bhutan, Austria, Canada, Romania, Portugal.
Cities
Ahmedabad, Visakhapatnam, Istanbul, Rajkot, Chiyoda, Toronto, Vadodara, Courbevoie, Algiers, Gimhae-si, Al Khobar, Dammam, Kolkata, Atyrau, Haryana, Ankara, Ernakulam, Ranchi, Calgary, Tehran, London, Kuwait City, Surat, Caracas, Nashik, Jamshedpur, Kuala Lumpur, Mumbai, Singapore, Hanoi, Houston, La Victoria, Coimbatore, Al Jubail, Melbourne, New Delhi, Ho Chi Minh City, Rio de Janeiro, Colombo, Gurgaon, Chennai, Granada, Abu Dhabi, Moscow, Faridabad, Bogota, Jakarta, Thiruvananthapuram, Busan, Los Angeles, Geoje-si, Brisbane, Dallas, Baroda, Milan, Madrid, Santiago, Pimpri-Chinchwad, Mexico City, Sharjah, Lagos, Bhopal, Edmonton, Cairo, Montreal, Ludhiana, Muscat, Thane, Pune, Navi Mumbai, Ulsan, Port-of-Spain, Riyadh, Dubai, Jeddah, Indore, Kanpur, Ahvaz, Howrah, Hong Kong, Jaipur, Seoul, Bengaluru, Nagpur, Vung Tau, Perth, Chandigarh, Manama, Noida, Karachi, Secunderabad, Bangkok, Sydney, Aberdeen, Hyderabad, Doha, New York, Petaling Jaya.
Have Any Questions !
DON’T HESITATE TO CONTACT US ANY TIME.
IMI ALLOYS INDIA LLP is a notable manufacturer, supplier, stockist, and exporter of bars – round bars, square bars, flat bars, etc. in various materials like Tool Steel, Alloy Steel, and High-Speed Steel in Mumbai, India. We are authorized dealers of Graphite India Limited (POWMEX STEELS DIVISION) and also the only authenticated stockist of Nachi Fujikoshi Corp in India for their High-Speed Steel, Powder Metallurgy, Tool Steel, and Alloy Steel Products.
Products
Material
Follow us
© 2021 – Imetal India. All Rights Reserved
With Love by RATH INFOTECH