Tool & Alloy Steel Bars Supplier, Stockist in USA
Our Alloy Steel UNS T41907 Flat Bars has a included in phosphorus for excellent heat stability and to avoid carbide precipitation during welding. When exposed to hydroxide compounds and an oxidizing agent, it possesses the capacity to with stand corrosion. Their usefulness make them unique hardness, resistance to wear and deformation, and ability to keep a cutting edge at elevated temperatures.
We ensure that each of the bars is efficient to function in any situation without any defects. We manufacture these Alloy Steel Cold Drawn Flat Rods in several types, sizes, dimensions, and also in custom-made specifications at the most reasonable prices. All our products are produced using high quality materials and advanced technology machinery in compliance with national and international quality standards.
We IMI Alloys India LLP test all these round bar before they are conveyed to shipment process. Few of the Destructive and Non-destructive testing we carry are Chemical composition analysis, Dimension measurements, Fatigue test, Bend test, Flattening test, Hardness test. We are diligently engaged in the distribution and export of various types of High Speed Steel Quenched & Tempered T1 Flat Bar to mainly all cities in USA.
Specifications of Tool Steel Square Bars
- Standard : ASTM A600, ASME SA600
- Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
- Form : Flat
- Thickness : 2-20mm x width 10-100mm
- Length : 100 mm to 10,000 mm
- Surface Condition : Black, Grinded, Turned Bright, Machined Proof
- Application : Lathe Tools, Milling Cutter, Cutter Blades, Boring Tools, Twist drills, Milling Knives, Reamers, Taps, Metalcutting saws, Screw Cutting Tools, File Cutter’s Chissels, Drills, Hobs, Drill Bits, Tread cutting tools etc
Types of Alloy Steel Round Rods in USA
Tool & Alloy Steel Round Bars
- ASTM A681 Alloy Steel D2 Quenched & Tempered Round Bars Supplier in USA
- Tool & Alloy Steel UNS T41901 Industrial Round Rods Distributor in New York
- ASME SA681 Tool & Alloy Steel 1.2436 Quenched & Tempered Round Bars Distributor in Los Angeles
- Tool & Alloy Steel H11 Round Bars Distributor in USA
- Chrome Moly D6 Cold Drawn Round Rods Distributor in Chicago
- ASTM A681 Alloy Steel H21 Hot Forged Round Bars Distributor in Houston
- Alloy Steel UNS T41907 Hot Rolled Round Rods Stockist in USA
- Chrome Moly H21 Cold Drawn Round Rods Exporter in New York
- Alloy Steel 1.2436 Hot Forged Round Rods Distributor in USA
- ASTM A681 Tool Steel EN-24 Quenched & Tempered Round Bars Manufacturer in Los Angeles
Tool & Alloy Steel Square Bars
- ASTM A681 Tool Steel 1.2436 Forged Square Rods Supplier in USA
- Tool Steel 1.2436 Industrial Square Rods Manufacturer in New York
- ASME SA681 Tool Steel EN-24 Square Rods Distributor in Los Angeles
- Tool Steel UNS T41901 Square Bars Stockist in USA
- Tool & Alloy Steel EN-52 Forged Square Rods Stockist in Chicago
- ASME SA681 Chrome Moly EN-52 Industrial Square Rods Exporter in Houston
- Chrome Moly UNS T41901 Cold Drawn Square Rods Exporter in USA
- Tool & Alloy Steel UNS T41901 Industrial Square Rods Manufacturer in New York
- Tool & Alloy Steel EN-24 Square Bars Manufacturer in USA
- ASME SA681 Alloy Steel D6 Hot Forged Square Bars Exporter in Los Angeles
Alloy Steel Flat Rods
- ASTM A681 Tool Steel H13 Black Flat Bars Distributor in USA
- Tool Steel 1.2436 Black Flat Rods Distributor in New York
- ASTM A681 Alloy Steel H13 Quenched & Tempered Flat Bars Distributor in Los Angeles
- Tool Steel D2 Flat Bars Manufacturer in USA
- Alloy Steel H13 Hot Rolled Flat Rods Exporter in Chicago
- ASTM A681 Chrome Moly EN-36C Industrial Flat Bars Distributor in Houston
- Chrome Moly S7 Flat Bars Exporter in USA
- Alloy Steel D3 Hot Forged Flat Rods Manufacturer in New York
- Alloy Steel UNS T41907 Industrial Flat Bars Stockist in USA
- ASME SA681 Chrome Moly EN-24 Flat Bars Supplier in Los Angeles
Why Choose IMI Alloys India LLP for Tool & Alloy Steel Bars in USA
IMI Alloys India LLP exports Tool Steel and Alloy Steel bars to customers all over USA. We are the authorized dealers of Graphite India Limited (POWMEX STEELS DIVISION) and Approved Stockists of Nachi Fujikoshi Corp for High Speed Steel, Tool Steel and Alloy Steel products. There is no ambiguity about the source of this material, as it has a direct, traceable origin.
Stock is maintained in good quantities at all times. You do not need to wait weeks for sourcing. Orders move out promptly, and freight to the USA is handled at a reasonable cost.
Clients we supply to include companies in oil drilling, petrochemical processing, marine equipment, specialty chemicals, and cutting tool manufacturing. Both simple and complex requirements get handled. Every bar goes through quality checks before it leaves our facility, and full documentation comes with the delivery.
Features & Benefits of Tool Steel Bars
Tool Steel bars get specified for jobs where softer materials simply do not last. Below are the practical reasons why:
- High Hardness: Tool steel hits hardness levels that regular carbon steel cannot get close to. Cutting tools, punches, dies, anything that needs to stay sharp through repeated cycles, this is the material that holds up.
- Consistent Grain Structure: Tool steel bars don’t have a soft core, nor irregular grain. The bar is uniform from the outside in. That consistency matters when the part gets machined to tight tolerances.
- Wear Resistance: The bars last longer in service. Replacement frequency drops, and so does the downtime that comes with it.
- Heat Treatment Response: Heat treatment can adjust hardness without unpredictable results. This is used by toolmakers working on dies and moulds to achieve specific hardness targets.
- Machinability in Annealed Condition: In the annealed state, the material cuts reasonably well. Rough machining gets done before hardening. That is the standard sequence in most die shops.
- Dimensional Accuracy: Flatness and straightness are within tolerance. Less correction is needed during setup, and less material is lost during machining.
- Performance Under Stress: These bars can handle repeated impact, elevated temperatures, and heavy loads. Tool steel handles these conditions without breaking down quickly. Hot work dies and heavy-duty cutting applications are the usual places you find them in.
Manufacturing Process of Tool & Alloy Steel Bars
Melting is done through electric arc furnace or vacuum induction melting, depending on what grade is being produced. High-Speed Steel and Powder Metallurgy grades go through tighter process controls to keep segregation low and cross-section consistency high.
Once melted, the material gets cast and then hot rolled or forged into bar form. Some grades go through grinding or peeling after that, mainly to hit closer surface tolerances. Annealing is used to take out internal stresses and bring the material to a machinable condition.
Before shipment, dimensional checks, hardness verification and surface inspection are carried out on bars. Each batch has material test certificates for chemical composition and mechanical properties.
Applications For Tool Steel Round Rods in USA
Generally, A2 tool steels are used for long run tooling applications, Some main applications for Tool & Alloy Steel Round Bars materials are:
- Blanking dies
- block and ring gauges
- coining
- cold forming
- cold trimming and forming dies
- cold shears
- rolls
- knurls and knurling tools
- machine parts
- mandrels
- punches and punch plates
- reamers
- shear and slitter blades
- stamping dies and threading tapes
Frequently Asked Questions
We supply Cold Work Tool Steel, Hot Work Tool Steel, High Speed Steel and Alloy Steel in round, flat and square bar.
D2, H13, M2, M35, T1, P20, EN series Alloy Steel, ASP 2052, and Nachi Fujikoshi grades for High-Speed Steel are stocked.
We offer round, square, flat and hexagonal forms. The grade and the requirements of the application will determine the form.
Diameter or thickness typically runs from 5 mm to 300 mm. Custom sizes can be arranged based on the order quantity and drawing requirements.
Bars are available as per AISI, DIN, JIS, BS and IS standards. The applicable standard depends on the grade ordered.
Customers want a hard, wear-resistant, dimensionally accurate, tough tool steel bar that responds consistently to heat treatment.
Its primary industries include oil drilling, petrochemical, marine equipment, energy production, cutting tool manufacturing, construction and specialty chemical industries.
Have Any Questions !
DON’T HESITATE TO CONTACT US ANY TIME.
